RL10 Redux (Now Mac Compatible!)

[Lemniscate Biscuit]

RL10 Redux​

Above: The RL10B-2
RL10 Redux [will have] almost every RL10 variant -- sea level to vacuum, ascent to landing, chemical to nuclear this pack will have them all. Each engine is made by hand with specs all researched by me.

Specs

Gallery

First row, left to right: RL10A-1, RL10A-3, RL10A-3A, RL10A-3C, RL10A-3S, RL10A-3-1, RL10A-3-3, RL10A-3-3A, RL10A-3-3B
Second row, left to right: RL10A-4, RL10A-4N, RL10A-4-1, RL10A-4-1N, RL10A-4-2, RL10A-4-2N, RL10A-5
Third row, left to right: RL10B-2
Fourth row, left to right: RL10C-1, RL10C-1A, RL10C-1-1, RL10C-1-1A, RL10C-2, RL10C-2-1, RL10C-3
Fifth row, left to right: CECE Base, CECE High, CECE Methane

These are some of the RL10's I plan on making, so stay tuned!
Changelog
1.1 (RL10-RO)
Updated engine specs. Visual overhaul.
Added the RL10A-5.
Added icon to mod display in the modloader mod list.
1.2
Engine nozzle diameters and lengths have been completely redone to be more realistic.
Adds the RL10A-3-3, RL10A-3-3A, RL10A-3-3B, RL10A-3C, RL10A-3S, RL10A-4, RL10A-4-2N AND RL10A-4 Methane.
New methalox tank for the RL10A-4 Methane engine.
RL10A-5 visual overhaul.
Engines have been ordered in the pick category from least to greatest model number in order to make finding an engine easier.
1.3
Engine plumes have been modified.
Adds the RL10C-1 and RL10C-1-1.
Part categories for the RL10A, RL10B and RL10C.
New mod image in the modloader.
RL10A-4-2N nozzle widened to be more realistic.
1.4
Fixed RL10A-3-3A heatbox.
1.5 (RL10 Redux)
Removed RL10-RO engines. Replaced with redone RL10A-3 and B-2 for RL10 Redux.
Adds the RL10B-2 and hydrolox tank.
RL10A-3 visual and realism overhaul.
New RL10 Redux part category.
New RL10 Redux mod logo.
1.5.1
Adds the RL10A-1, A-3-1, A-3-3, A-3C and A-3S.
Added blue attachments points.
Minor visual changes.
1.5.4
Adds the RL10A-3A, A-3-3A, A-3-3B, A-3C, A-3S, A-4, A-4N, A-4-1, A-4-1N, A-4-2, A-4-2N (fixed and extendable).
Minor visual changes.
1.5.5
Adds the RL10A-5, RL10C-1, RL10C-1A, RL10C-1-1, RL10C-1-1A, RL10C-2, RL10C-2-1, RL10C-3, CECE Demonstrator, CECE High and Methane CECE.
Minor visual changes.
>>>>>> D O W N L O A D H E R E <<<<<<
Any issues may be reported below. Questions and comments as well. Enjoy, and make sure to credit!

FOR ALL OTHER MOD-RELATED ISSUES PLEASE REFER TO THE BELOW:
Mods and installation: Questions and answers​

 

[leroxy2_0]

wow this mod looks incredibly gorgeous

 

[Lemniscate Biscuit]

wow this mod looks incredibly gorgeous

This is the 30th beta after all!

 

[Altaïr]

Looks very interesting. It looks carefully balanced, even if their TWR is very high in regards of SFS standards. Thrust is ok, it's mostly because of their low mass. Right now that's probably a beast in terms of ΔV

 

[GuHP20]

After a slew of issues, problems, and quagmires, I hereby present the beta of my first major modding project.
Enter RL10-RO
View attachment 113540


This beta pack includes the first major RL10A variants including the A-1 (shown above), the A-3 and RL10A-3-1 as well as the RL10A-4-1 and A-4-2. RL10B and C variants as well as the CECE are all to be made (and researched). This is, RL10-RO so all of these engines are realistic. Every one these engines have actual specifications and are realistically scaled to their real life counterpart. All engine dimensions are exact (hopefully). Pack includes its own hydrolox tank for the engines. BP edit to change values.

Please keep in mind that this pack, its engines, their specs and their designs are all subject to change as this is only a beta release.

Specs:
RL10A-1
Mass: 131 kg
Thrust: 13.4 t
Isp: 281.3 s

RL10A-3
Mass: 131 kg
Thrust: 13.6 t
Isp: 284.6 s

RL10A-3-1
Mass: 131 kg
Thrust: 13.7 t
Isp: 288.6 s

RL10A-4-1
Mass: 170 kg
Thrust: 19.6 t (dubious, subject to change)
Isp: 297.6 s

RL10A-4-2
Mass: 170 kg
Thrust: 9.8 t (dubious, subject to change)
Isp: 297.6 (dubious, subject to change)

Gallery
View attachment 113541
From left to right: Hydrolox tank, RL10A-1, RL10A-3, RL10A-3-1, RL10A-4-1, RL10A-4-2

View attachment 113543
These are all of the RL10's I plan on making, so stay tuned!

Any issues (which there definitely are) may be reported below. Questions and comments as well. Enjoy, and make sure to credit!

This looks amazing, so sad mods can't be used on mobile version

 

[Lemniscate Biscuit]

Looks very interesting. It looks carefully balanced, even if their TWR is very high in regards of SFS standards. Thrust is ok, it's mostly because of their low mass. Right now that's probably a beast in terms of ΔV

I spent 6 hours of my Chrismas break looking through 1960's NASA documents for all of these stats.

This looks amazing, so sad mods can't be used on mobile version

Thank you. I feel honored that you said this is amazing, especially from a long time member.

 

[Altaïr]

I spent 6 hours of my Chrismas break looking through 1960's NASA documents for all of these stats.

The effort is appreciable. I wasn't saying it's inaccurate though, I mostly spoke in terms of SFS balance.

Thank you. I feel honored that you said this is amazing, especially from a long time member.

I'm also a long time member, so that makes two of us

 

[MonkeSpaceflight]

This is sick! I think i'm gonna use it in a build i'm working on now. Love the attention to detail and realism in this. Noice job

 

[Orion]

Amazing. Words cannot describe how much I love this. And the fact that you put so much effort into this, even when you didn't think anything was working, is honestly more impressive than the mod. Good job.

 

[Lemniscate Biscuit]

Amazing. Words cannot describe how much I love this. And the fact that you put so much effort into this, even when you didn't think anything was working, is honestly more impressive than the mod. Good job.

Thanks.

 

[Lemniscate Biscuit]

Update coming soon

 

[Surfylion]

Looks exiting

 

[Lemniscate Biscuit]

All future versions will be uploaded on GitHub. Link is in the first post.

 

[Lemniscate Biscuit]

 

[Marmilo]

After a slew of issues, problems, and quagmires, I hereby present the beta of my first major modding project.
Enter RL10-RO​

View attachment 113540

This beta pack includes the first major RL10A variants including the A-1 (shown above), the A-3 and RL10A-3-1 as well as the RL10A-4-1 and A-4-2. RL10B and C variants as well as the CECE are all to be made (and researched). This is, RL10-RO so all of these engines are realistic. Every one these engines have actual specifications and are realistically scaled to their real life counterpart. All engine dimensions are exact (hopefully). Pack includes its own hydrolox tank for the engines. BP edit to change values.

Please keep in mind that this pack, its engines, their specs and their designs are all subject to change as this is only a beta release.

Specs:
RL10A-1
Mass: 131 kg
Thrust: 13.4 t
Isp: 281.3 s

RL10A-3
Mass: 131 kg
Thrust: 13.6 t
Isp: 284.6 s

RL10A-3-1
Mass: 131 kg
Thrust: 13.7 t
Isp: 288.6 s

RL10A-4-1
Mass: 170 kg
Thrust: 19.6 t (dubious, subject to change)
Isp: 297.6 s

RL10A-4-2
Mass: 170 kg
Thrust: 9.8 t (dubious, subject to change)
Isp: 297.6 (dubious, subject to change)

Gallery​

View attachment 113541

From left to right: Hydrolox tank, RL10A-1, RL10A-3, RL10A-3-1, RL10A-4-1, RL10A-4-2​

View attachment 113543

These are all of the RL10's I plan on making, so stay tuned!​

>>>>>> D O W N L O A D H E R E <<<<<<
Any issues (which there definitely are) may be reported below. Questions and comments as well. Enjoy, and make sure to credit!​

What's the dry/wet mass ratio of the hydrolox tank?

 

[Lemniscate Biscuit]

What's the dry/wet mass ratio of the hydrolox tank?

Same as the normal, stock fuel tank (to change with later updates)

 

[Kosmos419]

nice mod

 

[Lemniscate Biscuit]

nice mod

Thank.

 

[Lemniscate Biscuit]

Version 1.1 is out now on GitHub and ready to download!

Changes:​

• Updated values for engine thrust and specific impulse​
• Adds the RL10A-5 (above).​
• Adds mod icon in the modloader mod list.​

​

 

[MonkeSpaceflight]

cool! engine plumes look great

 

[Lemniscate Biscuit]

cool! engine plumes look great

That part took longer than I thought. Shorter than the research though!

 

[Orion]

I can finally make a DC-X! Thank you!

 

[Lemniscate Biscuit]

I can finally make a DC-X! Thank you!

Go ahead

 

[Lemniscate Biscuit]

Mac33299

 

[Mac33299]

Mac33299
View attachment 114941

ayyyyy