Team hawk 2/3 recreation

[NSG]

I recreated vulcan, i can aways modify the BP to have 2 hawks(as a BE-4) instead of a single titan(for functionality) this is also almost 100% vanilla except for the 2nd stage interstage

After this i did a rondevous with one of mu space stations but didn’t dock bc it didn’t have a docking adapter for skrunk-2(the spaceplane on top vulcan)

 

[Pink]

So the boosters should be 22m high. Yours are approx 23.7m high.
Get it within 0.5m and that will be close enough. This tolerance generally holds for the other dimensions also, so imagine I wrote "to the nearest 0.5m" to all the others also.

The diameter of your boosters is... about 2.3m? When it should be 1.6m.

The diameter of your core stage is 5m. It should be 5.4m.

It looks like the length of a Vulcan core is 33.3m (interstage not included). Yours is about 44m tall? Big disparency there...

Centaur is supposed to be 11.7m long. Yours is closer to 16m long.

 

[NSG]

Ok i believe that I’ve finished doing all the revisions needed, I’ll send you the new bp via discord DM’s

 

[Lev from Ukraine]

Nice

 

[NSG]

i forgor new images

 

[Pink]

First stage should be 33m excluding the interstage, and 38m including the interstage. As I count, yours is 32.5m excluding the interstage, 36m including the interstage. Just stretch your interstage by 2m and then it's good (aka move the centaur and payload up by 2m). Looks like the fairing should be shortened by 2m to compensate.

That's it, aside from the engines.
Shrink some titans so you actually have an engine configuration that matches. Two titans would give a TWR of 1.8, but 3/4 shrunk titans should be perfect. Don't forget that the width of the titans wont affect the thrust, so it's ok to change that independently to get the proportions looking correct.

You're almost there, it's just two dimensions and the engines. Change just that and I'll pass it. It'll be very legit because needs no cheats or bp edited heat, and the only engine tweaking is shrinking.

 

[NSG]

I am so fucking done with this vulcan, please let this be good enough

 

[NSG]

Apparently i was supposed to change the engine height to .75 too

 

[NSG]

 

[Pink]

haha, finally. Congrats, nice replica!

 

[TtTOtW]

Random_dude this is what we call "maintaining the standard". Not to make people suffer, but to teach them what a little bit of attention to detail can achieve. And to make sure the forum isn't flooded with low effort, low quality content. This isn't kindergarten. This is a community of experts in SFS. Welcome to the club.