Team Hawk: Shuttle

AstronautAdam

Swingin' on a Star
Atlas
Biker Mice from Mars
ET phone home
Floater
Copycat
Registered
#1
BP of shuttle and stack(both with twr 1,48)
BpSh.PNG

BpSt.PNG

Shuttle Adamis ready for depart
ShuttleLP.PNG

When was Apoapsis out of atmo, cut of engines, transfer fuel from stack to Adamis, detach stack with 10% fuel in it and ignite engines for orbit. Finally orbit!
ShuttleORM.PNG

ShuttleORL.PNG

So load
ShuttleORL.PNG

Load away, door docking permission granted
ShuttleORL2.PNG

Back to the Earth, already on chutes
ShuttleL.PNG

Heat shield detached, now landing
ShuttleL2.PNG

Landed and mission report
MA.PNG

Judges, I am awaiting.

AstronautAdam
 

AstronautAdam

Swingin' on a Star
Atlas
Biker Mice from Mars
ET phone home
Floater
Copycat
Registered
#2
This is theoretically 90% reusable- only fairing and heat shield(probably not but it blocks landing gear)
 

AstronautAdam

Swingin' on a Star
Atlas
Biker Mice from Mars
ET phone home
Floater
Copycat
Registered
#4
Uh quite simple- I am not very familiar with this type of cargo covers, I usually use only strut. Clipping trough strut doesnt work on Steam version(in my case)-lower fairing after opening wasnt really attached to shuttle. And in reenter it showed- lower fairing destroyed upper, so that TtTOtW, and how I can mention someone?​
 
T

TtTOtW

Guest
#5
You know how you open and close a solar panel or landing leg in the build grid? The same menu gives you a "Detach fairing" option for fairings. Deselect it. If it still detaches, then make sure you have something connected to the bottom or outer edge of at least one of the end fairings. Then it'll stay.