Hello everybody. I'm a SFS 1.5 - Foundation Update user and have been playing for a while however never really serious till recently.
This is my SpaceX inspired platform I created to launch a Starlink constellation into orbit. Each launch lifts 15 satellites into orbit and both 1st and 2nd stages return to earths surface under its own power.
Its still in its developmental phase so inputs and recommendations are welcome.
Question. How do I share my launcher config file?
1st Stage Setup:
View attachment 45610
2nd stage setup with fairings and 15 satellites:
View attachment 45611
Closer view of my 1st stage setup:
View attachment 45612
Launch Pad View:
View attachment 45613
First liftoff:
View attachment 45614
MECO (Main Engine Cut Off) - 2nd stage separation ( this SC is a older fuel tank version for stage 2. It had as a fuel backup for reentry burn just in case I burned too much. Latest is 1 tank for 2nd stage.)
View attachment 45615
Fairing separation at full thrust. Reaching proper orbital position.
View attachment 45617
1st stage landing ignition before full landing burn:
View attachment 45618
1st stage landing burn:
View attachment 45622
SECO (Second Engine Cut Off) / Payload Deployments:
View attachment 45623
2nd stage reentry burn:
View attachment 45624
2nd stage controlled free fall / deceleration:
View attachment 45625
2nd stage controlled free fall / deceleration lower atmosphere:
View attachment 45626
2nd stage landing ignition started:
View attachment 45627
2nd stage landing burn:
View attachment 45629
2nd stage landing burn for rough terrain:
View attachment 45631
2nd stage soft landing burn to land on engine bell. Allowing RCS to orient rocket into final resting place:
View attachment 45632
2nd stage soft landing main engine burn and RCS cut-off:
View attachment 45633
Starlink Satellite in orbit:
View attachment 45634
Starlink Constellation as of today:
View attachment 45635
This is my SpaceX inspired platform I created to launch a Starlink constellation into orbit. Each launch lifts 15 satellites into orbit and both 1st and 2nd stages return to earths surface under its own power.
Its still in its developmental phase so inputs and recommendations are welcome.
Question. How do I share my launcher config file?
1st Stage Setup:
View attachment 45610
2nd stage setup with fairings and 15 satellites:
View attachment 45611
Closer view of my 1st stage setup:
View attachment 45612
Launch Pad View:
View attachment 45613
First liftoff:
View attachment 45614
MECO (Main Engine Cut Off) - 2nd stage separation ( this SC is a older fuel tank version for stage 2. It had as a fuel backup for reentry burn just in case I burned too much. Latest is 1 tank for 2nd stage.)
View attachment 45615
Fairing separation at full thrust. Reaching proper orbital position.
View attachment 45617
1st stage landing ignition before full landing burn:
View attachment 45618
1st stage landing burn:
View attachment 45622
SECO (Second Engine Cut Off) / Payload Deployments:
View attachment 45623
2nd stage reentry burn:
View attachment 45624
2nd stage controlled free fall / deceleration:
View attachment 45625
2nd stage controlled free fall / deceleration lower atmosphere:
View attachment 45626
2nd stage landing ignition started:
View attachment 45627
2nd stage landing burn:
View attachment 45629
2nd stage landing burn for rough terrain:
View attachment 45631
2nd stage soft landing burn to land on engine bell. Allowing RCS to orient rocket into final resting place:
View attachment 45632
2nd stage soft landing main engine burn and RCS cut-off:
View attachment 45633
Starlink Satellite in orbit:
View attachment 45634
Starlink Constellation as of today:
View attachment 45635
Last edited: